Home › Engine / Hybrid System › 2TR-FE (STARTING) › STARTER (for 2.0 kW Type) › from 2020.08
RM27T0E _51 Engine / Hybrid System _053691 2TR-FE STARTING _0260714 STARTER(for 2.0 kW Type) A

2TR-FE STARTING  STARTER(for 2.0 kW Type)  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

for Automatic Transmission:

Install the starter assembly with the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


b.

for Manual Transmission:

i.

Temporarily install the starter assembly with bolt.


ii.
U147634E02
1.927,0.781 2.021,0.375 2.021,0.375 2.115,0.375 true 2.125,0.26 2.313,0.427 0.188,0.167 10 false *1

Temporarily install the clutch flexible hose bracket with the bolt.

Text in Illustration
*1 Clutch Flexible Hose Bracket


iii.

Tighten the 2 bolts.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)



c.

Connect the starter connector.


d.

Connect the starter wire harness with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


e.

Install the terminal cap.


Hide 31470 2.CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

Hide 51450 3.INSTALL REAR ENGINE UNDER COVER ASSEMBLY

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 5. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART