Home › Engine / Hybrid System › 5L-E (STARTING) › STARTER › from 2020.08
RM27T0E _51 Engine / Hybrid System _053693 5L-E STARTING _0260723 STARTER A

5L-E STARTING  STARTER  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

Install the starter assembly with the 2 bolts and nut.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


b.

Connect the starter wire with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


c.

Install the terminal cap.


d.

Connect the starter connector.


Hide 31484 2.CONNECT CLUTCH FLEXIBLE HOSE BRACKET

a.

Connect the clutch flexible hose bracket with the bolt.

Torque:
72 N*m (730 kgf*cm, 53 ft.*lbf)


Hide 31470 3.CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY

Hide 51450 4.INSTALL REAR ENGINE UNDER COVER ASSEMBLY

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART