Home › Suspension › SUSPENSION CONTROL › STABILIZER CONTROL ECU › from 2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260878 STABILIZER CONTROL ECU A

SUSPENSION CONTROL  STABILIZER CONTROL ECU  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 73900 3.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 4.REMOVE STABILIZER CONTROL ECU

a.

Disconnect the connector.

C214846E01
0.036,0 0.295,0.215 0.259,0.215 12 *A 3.595,0.019 3.854,0.234 0.259,0.215 12 *B

Text in Illustration
*A for LHD *B for RHD


b.

Remove the bolt and stabilizer control ECU.

NOTICE:
·

Avoid any impact to the stabilizer control ECU.

·

Replace the stabilizer control ECU with a new one if it is dropped.