Home › Suspension › SUSPENSION CONTROL › STABILIZER CONTROL ECU › from 2020.08
RM27T0E _53 Suspension _053706 SUSPENSION CONTROL _0260878 STABILIZER CONTROL ECU A

SUSPENSION CONTROL  STABILIZER CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 1.INSTALL STABILIZER CONTROL ECU

a.

Install the stabilizer control ECU with the bolt.

Torque:
14 N*m (138 kgf*cm, 10 ft.*lbf)

NOTICE:
·

Replace the stabilizer control ECU with a new one if it is dropped.

·

Make sure the bracket rotation stopper touches the installation position.




b.

Connect the connector.

NOTICE:

Securely connect the connector.



Hide 73900 2.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 4. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART