1.INSTALL FRONT PROPELLER SHAFT ASSEMBLY
Align the matchmarks on the yoke and differential flange.
Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.
Align the matchmarks on the yoke and transfer flange.
Install the propeller shaft assembly with the 4 washers and 4 nuts.
37117
2.INSTALL PROPELLER SHAFT HEAT INSULATOR WITH BRACKET (for 1GR-FE)
Install the propeller shaft heat insulator with bracket with the 2 bolts.
3.INSTALL FRONT EXHAUST PIPE
for 5L-E:
(See page Engine / Hybrid System>5L-E (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION)
for 1GR-FE:
(See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION)
for 2TR-FE:
(See page Engine / Hybrid System>2TR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION)
for 1GD-FTV:
(See page Engine / Hybrid System>1GD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE>INSTALLATION)