1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
55401E
3.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
55843A
4.REMOVE NO. 1 HEATER TO REGISTER DUCT
55844
5.REMOVE NO. 2 HEATER TO REGISTER DUCT
55971C
6.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
55972C
7.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
55950G
8.REMOVE DEFROSTER NOZZLE ASSEMBLY
86101H
9.REMOVE ANTENNA CORD SUB-ASSEMBLY
Disconnect the connector.
Detach the claw and clamp and remove the antenna cord sub-assembly.