Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
55843A
1.REMOVE NO. 1 HEATER TO REGISTER DUCT
Remove the 4 screws <A> and No. 1 heater to register duct.
55844
2.REMOVE NO. 2 HEATER TO REGISTER DUCT
Use the same procedure described for the No. 1 heater to register duct.
55971C
3.REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
Remove the screw <A>.
Detach the 2 claws and remove the No. 1 side defroster nozzle duct.
55972C
4.REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
Use the same procedure described for the No. 1 side defroster nozzle duct.
55950G
5.REMOVE DEFROSTER NOZZLE ASSEMBLY
Remove the 4 screws <A> and defroster nozzle assembly.
55845A
6.REMOVE NO. 3 HEATER TO REGISTER DUCT
Remove the 2 screws <A> and No. 3 heater to register duct.
82142
7.REMOVE NO. 2 INSTRUMENT PANEL WIRE
for LHD:
Disconnect the 2 connectors.
Detach the 20 clamps and remove the No. 2 instrument panel wire.
for RHD:
Disconnect the 2 connectors.
Detach the 20 clamps and remove the No. 2 instrument panel wire.
55981
8.REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
Remove the 6 screws <A> and No. 1 defroster nozzle garnish.
86101H
9.REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Navigation Antenna)
86860
10.REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation Antenna)
73960A
11.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
89611
12.REMOVE ENGINE SWITCH (w/ Entry and Start System)
55538D
13.REMOVE SUNSHINE SENSOR HOLE COVER (w/o Automatic Light Control System)
Detach the 2 claws and remove the sunshine sensor hole cover.
89120
14.REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
81850K
15.REMOVE SECURITY INDICATOR LIGHT ASSEMBLY