Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side) › from 2021.06
RM27T0E _58 Vehicle Interior _053737 SEAT _0261105 REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Power Seat Type LH Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:
·

Under either of the following conditions, perform initialization (initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is replaced with a new one.

-

Initialization (initial position reset) of the fold seat control ECU is performed.



·

Under any of the following conditions, perform initialization (initial position reset and initial position memorization) of the fold seat control ECU (See page Vehicle Interior>SEAT>REAR POWER SEAT CONTROL SYSTEM>INITIALIZATION).

-

The fold seat control ECU is exchanged with one from another vehicle.

-

The seatback frame and seat leg are inspected.

-

The seat is disassembled and the positions of the seatback and seat cushion change with respect to one another.

-

The seatback frame or seat leg is replaced.

-

The cable is disconnected from the battery while the seatback or seat cushion is operating.




HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 73949 1.REMOVE CAP

a.
B239512

Remove the 2 caps.


Hide 71693 2.REMOVE REAR SEAT CUSHION LOWER HINGE COVER LH

a.
B238683

Remove the 2 screws.


b.

Detach the 3 claws and remove the rear seat cushion lower hinge cover LH.


Hide 71693 3.REMOVE REAR SEAT CUSHION LOWER HINGE COVER RH

a.
B238682C05
1.76,1.698 1.76,2.021 1.76,2.021 1.51,2.021 true 1.323,1.938 1.479,2.083 0.156,0.146 10 false *a
*a Guide


Remove the 2 screws.


b.

Detach the 2 claws and guide and remove the rear seat cushion lower hinge cover RH.


Hide 71827B 5.REMOVE REAR SEAT NO. 1 CUSHION MOULDING

a.
B236519C06
1.427,2 1.01,2.167 1.01,2.167 0.688,1.917 true 2.792,1.896 2.458,2.188 2.458,2.188 2.073,1.938 true 0.948,2.208 1.125,2.396 0.177,0.188 10 true *a 2.385,2.208 2.552,2.365 0.167,0.156 10 true *a
*a Guide


Using a clip remover, remove the 2 clips.


b.

Detach the 2 claws and 4 guides to remove the rear seat No. 1 cushion moulding.


Hide 6.REMOVE SEAT CUSHION COVER WITH PAD

a.
B238685C02
0.823,3.135 1.125,3.135 1.125,3.135 3.063,1.417 true 0.375,1.177 1.125,3.125 true 0.667,3.021 1.24,3.302 0.573,0.281 10 false *a
*a Fastener


Open the 2 fasteners.


b.
B236671

Remove the 2 clips and open the under part of the seat cushion cover.


c.
B238687C02
1.563,1.896 0.563,1.896 0.563,1.896 0.563,1.49 true 1.823,1.896 2.677,1.896 2.677,1.896 2.677,1.333 true 1.604,1.802 1.771,1.958 0.167,0.156 10 false *a
*a Hook


Detach the 2 hooks and remove the seat cushion cover with pad.


Hide 79032 7.REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.
B236523C07
2.125,1.073 2.125,1.979 2.125,1.979 2.427,1.979 true 2.448,1.896 2.615,2.052 0.167,0.156 10 false *a
*a Fastener


Detach the fastener.


b.

Remove the 2 hog rings and No. 3 seat cushion cover sub-assembly LH.


Hide 71647F 8.REMOVE REAR SEAT CUSHION INNER EDGE PROTECTOR LH

a.
B236571C06
1.125,0.531 1.125,1.667 true 2.323,0.531 2.323,1.667 true 1.125,1.083 2.792,1.083 true 1.729,1.667 1.729,1.094 true 2.813,1 2.969,1.156 0.156,0.156 10 false *a
*a Tack Pin


Cut off the 5 tack pins and remove the rear seat cushion inner edge protector LH from the seat cushion pad.


Hide 71827B 9.REMOVE REAR SEAT NO. 2 CUSHION MOULDING

a.
B238689

Remove the 2 screws.


b.

Detach the 2 claws and remove the rear seat No. 2 cushion moulding.


Hide 79384A 10.REMOVE REAR SEAT NO. 3 LEG COVER LH

a.
B239683

Detach the 2 claws and remove the rear seat No. 3 leg cover LH.


Hide 71694E 11.REMOVE REAR SEAT CUSHION INNER HINGE COVER LH

a.
B238693C02
1.094,0.813 1.229,0.813 1.229,0.813 1.344,0.979 true 0.958,0.708 1.25,0.948 0.292,0.24 10 false *a
*a Guide


Remove the screw and clip.


b.

Detach the guide and remove the rear seat cushion inner hinge cover LH.


Hide 71694E 12.REMOVE REAR SEAT CUSHION INNER HINGE COVER RH

a.
B238692C02
1.635,1.25 1.635,1.771 1.635,1.771 1.792,1.771 true 1.802,1.656 1.958,1.823 0.156,0.167 10 false *a
*a Guide


Remove the screw and clip.


b.

Detach the guide and remove the rear seat cushion inner hinge cover RH.


Hide 72152 13.REMOVE LOWER SEAT TRACK RAIL LH (w/ Seatback Rail)

a.
B238694

Remove the 2 bolts and lower seat track rail LH.


Hide 66310F 14.REMOVE ROPE HOOK ASSEMBLY (w/ Seatback Hook)

a.
B237387C04
1.479,0.896 1.479,0.438 1.479,0.438 1.708,0.438 true 1.74,0.354 1.896,0.5 0.156,0.146 10 false *a
*a Protective Tape


Using a screwdriver, detach the 2 claws and open the cover.

HINT:

Tape the screwdriver tip before use.



b.
B237388

Remove the bolt and rope hook assembly.


Hide 71702C 15.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH

a.

w/ Seatback Rail:

i.
B238695

Detach the 7 clips and remove the rear seatback board sub-assembly LH.



b.

w/ Seatback Hook:

i.
B511114

Detach the 7 clips and remove the rear seatback board sub-assembly LH.



Hide 72635B 16.REMOVE REAR SEATBACK LOCK HOOK

a.
B238697

Remove the rear seatback lock hook.


Hide 71865 17.REMOVE REAR SEAT NO. 1 COVER BEZEL

a.
B238696C03
2.531,0.938 2.531,0.813 2.531,0.813 2.646,0.813 true 2.677,0.729 2.844,0.885 0.167,0.156 10 false *a
*a Guide


Remove the 2 screws.


b.

Detach the guide and remove the rear seat No. 1 cover bezel.


Hide 18.REMOVE SEATBACK COVER WITH PAD

a.
B518439C01
1.688,1.021 2.917,1.021 2.917,1.021 2.917,2.24 true 2.167,1.417 2.917,1.417 true 2.25,1.865 2.917,1.865 true 1.125,1.396 0.438,1.396 0.438,1.396 0.438,2.188 true 0.438,1.865 1.021,1.865 true 1.563,2.417 1.792,2.875 true 2.302,2.417 2.76,2.813 true 0.99,2.406 0.417,2.698 true 2.844,2.26 3.104,2.49 0.26,0.229 11 false *a 0.365,2.208 0.625,2.438 0.26,0.229 11 false *a 1.76,2.906 2.021,3.135 0.26,0.229 11 false *a 2.792,2.813 3.052,3.042 0.26,0.229 11 false *b 0.188,2.646 0.396,2.865 0.208,0.219 11 false *b
*a Hook
*b Hog Ring


Detach the 6 hooks.


b.

Remove the 2 hog rings


c.
B238699

Detach the 8 clips and remove the seatback cover with pad.


Hide 79034 19.REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

a.
B236581

Remove the 7 hog rings and No. 3 seatback cover sub-assembly LH.


Hide 71587C 20.REMOVE REAR NO. 2 SEATBACK EDGE PROTECTOR

a.
B236572C06
1.031,0.708 1.031,1.542 true 2.427,0.708 2.427,1.542 true 1.031,1.104 2.979,1.104 true 1.729,0.802 1.729,1.104 true 3.01,1 3.177,1.177 0.167,0.177 10 false *a
*a Tack Pin


Cut off the 5 tack pins and remove the rear No. 2 seatback edge protector from the seatback pad.


Hide 79962 21.REMOVE NO. 2 SEATBACK COVER

a.
B238700

Detach the 2 claws and remove the No. 2 seatback cover.


Hide 71970A 22.REMOVE REAR SEAT HEADREST COVER

a.
B238701C02
1.521,1.396 1.677,1.688 1.677,1.688 2.365,1.688 true 2.385,1.594 2.646,1.854 0.26,0.26 10 true *a
*a Guide


Remove the 2 screws.


b.

Detach the 2 claws and guide to remove the rear seat headrest cover.


Hide 71987A 23.REMOVE REAR SEAT HEADREST CABLE

a.
B236550C06
0.656,1.406 1.208,1.625 1.208,1.625 0.635,1.75 true 2.656,1.031 2.781,1.177 2.781,1.177 2.906,1.177 true 0.521,1.938 0.313,1.792 0.313,1.792 0.229,1.792 true 1.24,1.552 1.406,1.698 0.167,0.146 10 false *b 2.917,1.083 3.083,1.229 0.167,0.146 10 false *a 0.094,1.688 0.458,1.875 0.365,0.188 10 false *a
*a Cable End
*b Clamp


Detach the 2 clamps.


b.

Twist the 2 cable ends in the direction indicated by the arrow and remove the rear seat headrest cable.


Hide 71970 24.REMOVE REAR SEAT HEADREST ASSEMBLY

a.
B238706

Remove the 3 nuts and rear seat headrest assembly.


Hide 71587C 25.REMOVE REAR SEATBACK EDGE PROTECTOR

a.
B236541

Detach the 4 claws and remove the 2 rear seatback edge protectors.


Hide 71834C 26.REMOVE REAR NO. 3 SEAT INNER RECLINING COVER LH

a.
B238704

Detach the 4 claws and remove the rear No. 3 seat inner reclining cover LH.


Hide 71834C 27.REMOVE REAR NO. 3 SEAT OUTER RECLINING COVER LH

a.
B238705C02
1.771,0.99 1.875,0.99 1.875,0.99 2,1.167 true 1.552,0.917 1.75,1.073 0.198,0.156 10 true *a
*a Guide


Remove the screw.


b.

Detach the guide and 2 claws to remove the rear No. 3 seat outer reclining cover LH.


Hide 79202 28.REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH

a.
B247971

Remove the bolt and disconnect the wire harness.


b.
B247518

Using a screwdriver, release the lock lever as shown in the illustration.


c.
B237378

Retract the seat cushion frame.


d.

Using a T40 "TORX" socket wrench, remove the 4 "TORX" bolts and No. 2 seat cushion frame sub-assembly LH.


Hide 79384 29.REMOVE REAR SEAT LEG COVER LH

a.
B238690C02
1.208,3.365 1.208,3.01 1.208,3.01 2.323,3.01 true 1.729,3.281 1.729,3.01 true 2.198,3.198 2.198,3.01 true 2.333,2.927 2.49,3.073 0.156,0.146 10 false *a
*a Hook


Remove the clip.


b.

Detach the 3 hooks and 5 clips to remove the rear seat leg cover LH.


Hide 73590 30.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH

Hide 72906 31.REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

a.
B238691C01
1.667,2.667 1.667,2.406 1.667,2.406 1.531,2.406 true 1.667,2.406 1.667,2.146 true 1.594,1.948 1.729,1.948 false 1.656,1.948 1.615,1.604 1.615,1.604 1.469,1.604 true 1.354,2.313 1.51,2.469 0.156,0.156 10 false *a 1.323,1.521 1.479,1.75 0.156,0.229 10 true *a
*a Guide


Remove the 3 clips.


b.

Detach the 2 claws and 4 guides to remove the 3rd seat link sub-assembly LH.


Hide 71844C 32.REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH

a.
B238702

Detach the 5 claws and remove the rear No. 2 seat inner reclining cover LH.


Hide 71844A 33.REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH

a.
B238703C02
1.156,1.656 1.073,1.656 1.073,1.656 1.073,1.469 false 1.167,1.583 1.323,1.729 0.156,0.146 10 false *a
*a Guide


Remove the screw.


b.

Detach the guide and 2 claws to remove the rear No. 2 seat outer reclining cover LH.


Hide 72690A 34.REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY LH

a.
B236547C04
2.177,1.854 2.49,1.979 2.49,1.979 1.25,2.354 true 0.885,2.396 0.813,2.156 0.813,2.156 0.448,2.156 true 2.542,1.885 3.052,2.802 0.51,0.917 10 false *a 0.26,2.073 0.417,2.219 0.156,0.146 10 false *b
*a Clamp
*b Cable End


Detach the 2 clamps.


b.

Twist the cable end in the direction indicated by the arrow and remove the rear seat lock release strap assembly LH.


Hide 72690A 35.REMOVE REAR SEAT LOCK RELEASE STRAP ASSEMBLY RH (for RH Side)

a.
B236546C02
2.25,2.125 2.25,1.979 2.25,1.979 2.615,1.979 true 2.25,1.979 1.51,2.104 true 1.906,2.333 0.323,2.333 true 0.49,1.896 0.49,2.333 true 1.823,1.573 1.063,1.573 1.063,1.573 1.063,2.333 true 1.656,2.448 1.594,2.417 1.594,2.417 1.271,2.417 true 2.177,2.125 2.323,2.271 0.146,0.146 10 false *a 0.156,2.25 0.302,2.396 0.146,0.146 10 false *b 1.083,2.344 1.229,2.49 0.146,0.146 10 false *c
*a Cable Tie
*b Clamp
*c Cable End


Cut off the 2 cable ties and detach the 3 clamps.


b.

Twist the cable end in the direction indicated by the arrow and remove the rear seat lock release strap assembly RH.


Hide 72695C 36.REMOVE REAR SEAT LOCK CONTROL CABLE LH

a.
B236549C04
1.771,2.031 0.604,2.031 true 0.854,1.094 0.854,2.031 true 0.615,0.979 0.813,0.708 0.813,0.708 1.052,0.708 true 2.875,1.49 2.75,1.281 2.75,1.281 2.563,1.281 true 0.406,1.948 0.563,2.083 0.156,0.135 10 false *b 1.052,0.625 1.208,0.76 0.156,0.135 10 false *a 2.396,1.188 2.583,1.385 0.188,0.198 10 true *a
*a Cable End
*b Clamp


Detach the 2 clamps.


b.

Twist the 2 cable ends in the direction indicated by the arrow and remove the rear seat lock control cable LH.


Hide 72695B 37.REMOVE REAR SEAT LOCK CONTROL CABLE RH (for RH Side)

a.
B236548C02
0.979,0.896 2.031,0.896 2.031,0.896 2.104,0.896 true 2.031,1.198 0.333,1.198 true 1.625,0.323 0.427,0.323 0.427,0.323 0.427,1.198 true 0.625,2.292 0.625,1.198 true 1.854,2.885 1.667,2.583 1.667,2.583 1.552,2.583 true 1.802,1.292 1.438,1.292 true 2.698,0.875 2.333,0.875 true 2.115,0.802 2.313,1 0.198,0.198 10 true *b 0.146,1.104 0.292,1.26 0.146,0.156 10 false *a 1.365,2.5 1.531,2.677 0.167,0.177 10 true *c 1.271,1.208 1.417,1.354 0.146,0.146 10 false *c
*a Cable Tie
*b Clamp
*c Cable End


Cut off the 2 cable ties and detach the 3 clamps.


b.

Twist the 2 cable ends in the direction indicated by the arrow and remove the rear seat lock control cable RH.


Hide 79304A 38.REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH

a.
B238707

Using a T45 "TORX" socket wrench, remove the 4 "TORX" bolts and No. 3 seatback frame sub-assembly LH.


Hide 82196 39.REMOVE REAR NO. 2 SEAT WIRE LH

a.
B620980

Remove the warning reflector holder.


b.
B621016

Disconnect the connector.


c.

Detach the wire harness clamp and claw to remove the rear No. 2 seat wire LH.


Hide 79040 40.REMOVE NO. 3 SEAT LEG ASSEMBLY LH

a.
B238829

Remove the 4 clips and seat cushion under carpet LH from the No. 3 seat leg assembly LH.


Hide 79020B 41.REMOVE NO. 2 SEAT LEG ASSEMBLY (for RH Side)

a.
B236573

Remove the 4 clips and seat cushion under carpet RH from the No. 2 seat leg assembly.