Wear protective gloves. Sharp areas on the parts may injure your hands.
73380C
1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
| *a | Protruding Part |
Connect the belt with the bolt.
Do not allow the anchor part of the rear No. 1 seat outer belt to overlap the protruding parts of the seat cushion frame.
w/ Seat Belt Warning System:
Attach the clamp and connect the connector.
2.INSTALL SEAT CUSHION COVER WITH PAD
71585
3.INSTALL REAR NO. 2 SEAT HINGE COVER RH
71586
4.INSTALL REAR NO. 2 SEAT HINGE COVER LH
72908B
5.INSTALL REAR SEAT CUSHION UNDER COVER SUB-ASSEMBLY LH
72649
6.INSTALL REAR SEAT CUSHION SUPPORT SPRING
78917
7.INSTALL FOLD SEAT LEG LOCK CUSHION
71647G
8.INSTALL REAR SEAT CUSHION EDGE PROTECTOR
71301D
9.INSTALL REAR SEAT HINGE SUB-ASSEMBLY RH
71305C
10.INSTALL REAR SEAT STAY SUB-ASSEMBLY
71302D
11.INSTALL REAR SEAT HINGE SUB-ASSEMBLY LH
72779
12.INSTALL REAR SEAT HINGE PAWL GUIDE
72205B
13.INSTALL SEAT TRACK OPEN LEVER PIN SUB ASSEMBLY
71876K
14.INSTALL RECLINING ADJUSTER INSIDE COVER LH
71324G
15.INSTALL REAR NO. 2 SEAT CUSHION
71833A
16.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
71844D
17.INSTALL REAR SEAT RECLINING COVER LH
18.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Install the rear No. 1 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Tumble Seat Type LH Side)>INSTALLATION).
19.CHECK SEAT BELT WARNING SYSTEM (w/ Seat Belt Warning System)