Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE REAR NO. 2 SEAT ASSEMBLY LH
Remove the rear No. 2 seat assembly LH (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>REMOVAL).
71693
2.REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH (w/ Seat Belt Warning System)
71693
3.REMOVE REAR SEAT LOWER CUSHION HINGE COVER RH
71827B
4.REMOVE REAR NO. 1 SEAT CUSHION MOULDING (w/ Seat Belt Warning System)
5.REMOVE SEAT CUSHION COVER WITH PAD (w/ Seat Belt Warning System)
71827B
6.REMOVE REAR NO. 2 SEAT CUSHION MOULDING (w/ Seat Belt Warning System)
79202
7.REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY LH (w/ Seat Belt Warning System)
72906
8.REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH (w/ Seat Belt Warning System)
72058B
9.REMOVE REAR NO. 2 SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Seat Belt Warning System)
79384
10.REMOVE REAR SEAT LEG COVER LH (w/ Seat Belt Warning System)
79384A
11.REMOVE REAR NO. 3 SEAT LEG COVER LH (w/ Seat Belt Warning System)
73590
12.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
w/ Seat Belt Warning System:
Disconnect the connector and detach the clamp.
Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.