Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › ENGINE OIL COOLER › from 2020.08
RM27T0E _51 Engine / Hybrid System _053687 1GR-FE LUBRICATION _0260691 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL STUD BOLT

NOTICE:

If the stud bolt is deformed or the threads are damaged, replace it.


a.

Using E8 "TORX" socket wrenches, install the 2 stud bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 15710 2.INSTALL OIL COOLER ASSEMBLY

a.

Install the new oil cooler gasket and new oil cooler o-ring.


b.

Install the oil cooler assembly with the 2 bolts and 2 nuts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


c.
A491390E01
2.802,1.156 2.979,1.323 0.177,0.167 10 false *1 2.542,1.573 2.719,1.74 0.177,0.167 10 false *2 0.563,0.708 0.76,0.906 0.198,0.198 10 false *a 0.938,1.146 1.135,1.344 0.198,0.198 10 true *b

Install the 2 hoses.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 16206 4.CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A491391E01
0.656,0.427 0.854,0.646 0.198,0.219 10 false *a 0.24,0.844 0.438,1.063 0.198,0.219 10 true *b

Connect the 2 hoses and water by-pass pipe.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



b.

Install the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51405A 12.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY