Screen Flicker or Color Distortion
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
INSPECTION PROCEDURE
| 1. CHECK DISPLAY SETTING |
Enter the display adjustment screen by pressing the "DISP" switch.

Reset display settings (contrast, brightness) and check that the screen appears normal.
- OK:
- The display returns to normal.
|
|
||||
| OK | ||
| ||
| 2. CHECK CABIN |
Check that the temperature in the cabin is neither -20°C (-4°F) or lower nor 65°C (149°F) or higher.
- HINT:
- The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.
- Standard:
- Temperature in the cabin is between -20°C (-4°F) and 65°C (149°F).
|
|
||||
| OK | |
| 3. CHECK COLOR BAR (OPERATION CHECK) |
Enter the "Color Bar Check Mode" screen. Refer to Check Color Bar in Operation Check (Click here).

Check that the color bars match the displayed names.
- OK:
- Color bars match the displayed names.
|
|
||||
| OK | ||
| ||
