2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Touch Panel Switch does not Function

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

INSPECTION PROCEDURE


1. CHECK TOUCH PANEL
  1. Check for foreign matter on the display.

    OK:
    The display is clean.



NG
CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK


2. CHECK TOUCH SWITCH (OPERATION CHECK)

  1. E176521
    Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check (Click here).

  1. Touch the display in the area where the switch malfunction occurs.

    OK:
    A "+" mark appears at the touched position.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (Click here)


← Panel Switches do not Function (Sep 2011 – Dec 2011)Screen Flicker or Color Distortion (Sep 2011 – Dec 2011) →