2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Screen Flicker or Color Distortion

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING

  1. E176542E04
    Enter the display adjustment screen by pressing the "DISP" switch.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.

    Text in Illustration 
    *1
    Example:



NG
Go to step 2
OK

END

2. CHECK CABIN
  1. Check that the temperature in the cabin is neither -20°C (-4°F) or lower nor 65°C (149°F) or higher.

    HINT:
    The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

    OK:
    Temperature in the cabin is between -20°C (-4°F) and 65°C (149°F).



NG
SET CABIN TO APPROPRIATE TEMPERATURE
OK


3. CHECK COLOR BAR (OPERATION CHECK)

  1. E176520
    Enter the "Color Bar Check Mode" screen. Refer to Check Color Bar in Operation Check (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Touch Panel Switch does not Function (Sep 2011 – Dec 2011)Vehicle Position Mark Deviates Greatly (Sep 2011 – Dec 2011) →