2011-2013 Land Cruiser · Service Manual Brake

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
(Click here)

3. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(Click here)

4. REMOVE YAW RATE SENSOR

  1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

    C177095E01

    C170924E01

  1. Remove the 2 bolts and sensor.

← COMPONENTS (from Sep 2011)REMOVAL (from Jan 2012) →