2011-2013 Land Cruiser · Service Manual Brake

REMOVAL

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
(Click here)

4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(Click here)

5. REMOVE YAW RATE SENSOR

  1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.

    C177095E01

    C170924E01

  1. Remove the 2 bolts and sensor.

← REMOVAL (Sep 2011 – Dec 2011)INSPECTION (from Sep 2011) →