REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE LOWER CONSOLE BOX (w/o Console Box Lid) |
| 3. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box) |
| 4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box) |
| 5. REMOVE DECELERATION SENSOR (for Automatic Transmission) |
Disconnect the sensor connector, and then detach the clamp from the sensor bracket.




Remove the 2 bolts and sensor.
| 6. REMOVE DECELERATION SENSOR (for Manual Transmission) |
Disconnect the sensor connector, and then detach the clamp from the sensor bracket.
Remove the 2 bolts and sensor.




