B2015 Open in Right Side Upper MOS
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Also covers:
- B2016 Open in Right Side Lower MOS
- B2020 Open in Left Side Upper MOS
- B2021 Open in Left Side Lower MOS
- B2025 Right Side Current Detection Circuit Malfunction Hi
- B2026 Right Side Current Detection Circuit Malfunction Lo
- B2027 Right Side Over-Current Malfunction
- B2030 Left Side Current Detection Circuit Malfunction Hi
- B2031 Left Side Current Detection Circuit Malfunction Lo
- B2032 Left Side Over-Current Malfunction
- B2035 Power Supply Relay Adherence Malfunction
- B2040 EEPROM Malfunction
- B2041 Fall of Raised Voltage
- B2043 Fall of B+ Voltage
- B2047 Seat Belt Control ECU Inner Circuit Malfunction
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The DTCs above are stored during the self diagnosis of the seat belt control ECU.| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2015 |
Open in the right side upper MOS. |
Seat belt control ECU |
| B2016 |
Open in the right side lower MOS. |
Seat belt control ECU |
| B2020 |
Open in the left side upper MOS. |
Seat belt control ECU |
| B2021 |
Open in the left side lower MOS. |
Seat belt control ECU |
| B2025 |
Malfunction in the right side current detection HI circuit. |
Seat belt control ECU |
| B2026 |
Malfunction in the right side current detection LO circuit. |
Seat belt control ECU |
| B2027 |
Overcurrent in the right side circuit. |
Seat belt control ECU |
| B2030 |
Malfunction in the left side current detection HI circuit. |
Seat belt control ECU |
| B2031 |
Malfunction in the left side current detection LO circuit. |
Seat belt control ECU |
| B2032 |
Overcurrent in the left side circuit. |
Seat belt control ECU |
| B2035 |
Adherence malfunction in the power supply relay. |
Seat belt control ECU |
| B2040 |
EEPROM malfunction. |
Seat belt control ECU |
| B2041 |
Decline in raised voltage. |
Seat belt control ECU |
| B2043 |
Decline in B+ voltage. |
Seat belt control ECU |
| B2047 |
Malfunction in the inner circuit of the seat belt control ECU. |
Seat belt control ECU |
INSPECTION PROCEDURE
| 1. CHECK DTC (PRE-CRASH SAFETY SYSTEM) |
Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
OK
(DTC is not output)
A
NG
(for LHD)
B
NG
(for RHD
C
|
|
||||
|
|
||||
| A | ||
| ||
