C1421 Open or Short in Master Cylinder Pressure Sensor
Diagnostic trouble codes · Vehicles built from Jan 2012
Also covers:
- C1281 Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC)
- C1423 Master Cylinder Pressure Sensor Zero Point Low Malfunction
- C1424 Master Cylinder Pressure Sensor Output Malfunction
DESCRIPTION
The pressure control sensor and master cylinder pressure sensor are connected to the skid control ECU in the master cylinder solenoid.

| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1421 |
Either condition is met: Both of the following conditions continue for at least 1.2 seconds.
|
Master cylinder solenoid |
| C1423 |
Both of the following conditions continue for at least 5 seconds
|
Master cylinder solenoid |
| C1424 |
One of the following conditions is met:
|
Master cylinder solenoid |
| C1281 |
Detected only during Test Mode |
Master cylinder solenoid |
INSPECTION PROCEDURE
- NOTICE:
- After replacing the master cylinder solenoid, perform zero point calibration (Click here).
| 1. REPLACE MASTER CYLINDER SOLENOID |
Replace the master cylinder solenoid (for LHD: Click here, for RHD: Click here).
| NEXT | ||
| ||
