C1201 Engine Control System Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
DESCRIPTION
If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU (master cylinder solenoid). The skid control ECU (master cylinder solenoid) stores this DTC and prohibits the following controls:- VSC
- TRC
- Crawl Control
- Multi-terrain select control
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1201 |
An engine control system malfunction signal continues for 1 second or more. |
Engine control system |
INSPECTION PROCEDURE
| 1. CHECK ENGINE TYPE |
Check the engine type.
Result Result
Proceed to
1VD-FTV
A
1UR-FE
B
3UR-FE
C
|
|
||||
|
|
||||
| A | |
| 2. CHECK FOR DTC (ENGINE CONTROL SYSTEM) |
Check if any engine control system DTC is output (w/o DPF: Click here, w/ DPF: Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output (w/o DPF)
B
DTC is output (w/ DPF)
C
|
|
||||
|
|
||||
| A | ||
| ||
| 3. CHECK FOR DTC (ENGINE CONTROL SYSTEM) |
Check if any engine control system DTC is output (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | ||
| ||
| 4. CHECK FOR DTC (ENGINE CONTROL SYSTEM) |
Check if any engine control system DTC is output (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | ||
| ||
