C1201/51 Engine Control System Malfunction
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
DESCRIPTION
If trouble occurs in the engine control system, the ECM transmits the abnormality to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:- VSC
- A-TRC
- CRAWL
- Hill-start Assist Control
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1201/51 |
A malfunction signal is received from the ECM. |
Engine control system |
INSPECTION PROCEDURE
| 1. CHECK DTC (FOR ENGINE CONTROL SYSTEM) |
Check if the engine control system DTC is output (for 2UZ-FE: Click here/ for 1VD-FTV: Click here/ for 3UR-FE: Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
- HINT:
- Refer to the ECM installation procedures:
- for 2UZ-FE (Click here)
- for 1VD-FTV (Click here)
- for 3UR-FE (Click here)
- Refer to Engine Control (How to Proceed with Troubleshooting):
- for 2UZ-FE (Click here)
- for 1VD-FTV (Click here)
- for 3UR-FE (Click here)
- Refer to the ECM installation procedures:
|
|
||||
| A | ||
| ||
