C15C3/75 Brake System Control Module Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The steering control ECU detects a vehicle speed error by receiving an error signal from the skid control ECU via CAN communication.If the steering control ECU detects this error signal, it will turn the master warning light on, store this DTC, and stop VGRS operation.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| C15C3/75 |
The steering control ECU receives a vehicle speed error signal via CAN communication. |
|
INSPECTION PROCEDURE
| 1. CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM) |
Check for DTCs in the vehicle stability control system (Click here).
Result Result
Proceed to
DTC is not output
OK
DTC is output
NG
|
|
||||
| OK | |
| 2. CHECK DTC (CAN COMMUNICATION SYSTEM) |
Using the intelligent tester, check if the CAN communication system is functioning normally (Click here for LHD, Click here for RHD).
Result Result
Proceed to
DTC is not output (for LHD)
A
DTC is not output (for RHD)
B
DTC is output (for LHD)
C
DTC is output (for RHD)
D
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
