2011-2013 Land Cruiser · Service Manual Audio / Visual / Telematics

Radio Broadcast cannot be Received (Bad Reception)

Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

INSPECTION PROCEDURE


1. CHECK IF RADIO AUTO-SEARCH FUNCTIONS PROPERLY
  1. Perform the auto-search of the radio and check that it functions normally.

    OK:
    Radio auto-search functions normally.



NG
Go to step 2
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)

2. CHECK OPTIONAL COMPONENTS
  1. Check if the telephone antenna or other optional components are installed.

    OK:
    Optional component(s) installed.



NG
Go to step 3
OK

EFFECT FROM OPTIONAL COMPONENTS

3. CHECK ANTENNA FOR NOISE PRODUCTION
  1. With the ignition switch ACC, turn on the radio and choose the AM mode.

  1. Place the tip of a screwdriver on the antenna and check that noise is heard from the speakers.

    OK:
    Noise is heard.



NG
Go to step 4
OK

REPLACE RADIO RECEIVER ASSEMBLY (Click here)

4. CHECK RADIO RECEIVER ASSEMBLY (ANTENNA)

  1. E108381
    Remove the antenna plug of the radio receiver.

  1. With the radio receiver connector connected, turn the ignition switch to ACC.

  1. Turn on the radio and choose the AM mode.

  1. Place a flat-head screwdriver or a piece of metal, such as a thin wire, on the antenna jack of the radio receiver. Check that noise is heard from the speakers.

    OK:
    Noise is heard.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

REPLACE ANTENNA ASSEMBLY AND ANTENNA CORD SUB-ASSEMBLY (Click here)


← CD Sound Skips (from Jan 2012)Radio Broadcast cannot be Received (Bad Reception) (from Jan 2012) →