REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE ROOF HEADLINING ASSEMBLY (w/ Diversity) |
 |
w/o Sliding Roof:
Remove the roof headlining (Click here).
w/ Sliding Roof:
Remove the roof headlining (Click here).
| 3.
REMOVE REAR NO. 2 ROOF AIR DUCT (w/ Diversity) |
 |
- w/o Sliding Roof:
Remove the 2 clips and duct.
- w/ Sliding Roof:
Remove the 2 clips and duct.
| 4.
REMOVE REAR NO. 5 ROOF AIR DUCT (w/ Diversity) |
 |
- w/o Sliding Roof:
Remove the 2 clips and duct.
- w/ Sliding Roof:
Remove the 2 clips and duct.
| 5.
REMOVE REAR NO. 4 ROOF AIR DUCT (w/ Diversity) |
 |
- Remove the 2 clips and duct.
| 6.
REMOVE REAR NO. 3 ROOF AIR DUCT (w/ Diversity) |
 |
- Remove the clip and duct.
| 7.
REMOVE REAR NO. 1 ROOF AIR DUCT (w/ Diversity) |
 |
- Remove the 3 clips and duct.
| 8.
REMOVE AMPLIFIER ANTENNA ASSEMBLY (w/ Diversity) |
 |
Disconnect the 3 connectors and remove the 2 bolts.


Detach the 9 clamps and remove the antenna.
| 9.
REMOVE AMPLIFIER ANTENNA ASSEMBLY (w/o Diversity) |
 |
- Disconnect the 2 connectors and detach the clamp.
Remove the bolt and amplifier antenna.