2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
  1. Attach the 2 claws.

  1. Install the headlight washer actuator sub-assembly LH with the bolt.

    Torque:
    1.1 N*m{ 11 kgf*cm , 10 in.*lbf }


2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.


3. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH
  1. Attach the 2 claws to install the type 1 headlight washer nozzle sub-assembly LH.


4. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.


5. INSTALL HEADLIGHT CLEANER HOSE
  1. Attach the 4 clamps and install the headlight cleaner hose.

  1. Connect the headlight cleaner hose.


6. INSTALL FRONT BUMPER ASSEMBLY
(Click here)
← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →