2011-2013 Land Cruiser · Service Manual Vehicle Exterior

B2420 AFS ECU Malfunction

Diagnostic trouble codes · Vehicles built from Jan 2012

Also covers:

DESCRIPTION

When the headlight leveling ECU*1 or headlight swivel ECU*2 detects a malfunction in itself, this DTC is stored.
  1. *1: w/ Static Headlight Auto Leveling
  2. *2: w/ Dynamic Headlight Auto Leveling
DTC Code
DTC Detection Condition
Trouble Area
B2420
  1. A malfunction in the headlight leveling ECU. (w/ Static Headlight Auto Leveling)
  2. A malfunction in the headlight swivel ECU. (w/ Dynamic Headlight Auto Leveling)
  1. Headlight leveling ECU assembly (w/ Static Headlight Auto Leveling)
  2. Headlight swivel ECU assembly (w/ Dynamic Headlight Auto Leveling)

INSPECTION PROCEDURE

NOTICE:
After replacing the headlight leveling ECU*1 or headlight swivel ECU*2, initialization of the ECU is necessary (except w/ Dynamic Headlight Auto Leveling) (Click here).
  1. *1: w/ Static Headlight Auto Leveling
  2. *2: w/ Dynamic Headlight Auto Leveling


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B2420 output does not occur.

    Result 
    Result
    Proceed to
    OK
    A
    NG (w/ Static Headlight Auto Leveling)
    B
    NG (w/ Dynamic Headlight Auto Leveling) (for LHD)
    C
    NG (w/ Dynamic Headlight Auto Leveling) (for RHD)
    D



B
REPLACE HEADLIGHT LEVELING ECU ASSEMBLY (Click here)

C
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY (Click here)

D
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)


← B2417 Headlight Beam Level Control Motor LH Malfunction (+ B2418) (from Jan 2012)B2424 Headlight Leveling Motor LH Communication Malfunction (+ B2425) (from Jan 2012) →