B2450 Initialization has not been Performed
Diagnostic trouble codes · Vehicles built from Jan 2012
DESCRIPTION
Initialization of the headlight leveling ECU*1 or headlight swivel ECU*2 has not been performed.- *1: w/ Static Headlight Auto Leveling
- *2: w/ Dynamic Headlight Auto Leveling
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2450 |
|
|
INSPECTION PROCEDURE
- NOTICE:
- After replacing the headlight leveling ECU*1 or headlight swivel ECU*2, initialization of the ECU is necessary (except w/ Dynamic Headlight Auto Leveling) (Click here).
- *1: w/ Static Headlight Auto Leveling
- *2: w/ Dynamic Headlight Auto Leveling
- *1: w/ Static Headlight Auto Leveling
| 1. PERFORM INITIALIZATION |
Perform initialization of the headlight leveling ECU*1 or headlight swivel ECU*2 (Click here).
- *1: w/ Static Headlight Auto Leveling
- *2: w/ Dynamic Headlight Auto Leveling
- *1: w/ Static Headlight Auto Leveling
| NEXT | |
| 2. CHECK FOR DTC |
Check for DTCs (Click here).
- OK:
- DTC B2450 is not output.
Result Result
Proceed to
OK
A
NG (w/ Static Headlight Auto Leveling)
B
NG (w/ Dynamic Headlight Auto Leveling) (for LHD)
C
NG (w/ Dynamic Headlight Auto Leveling) (for RHD)
D
- HINT:
- If the headlight leveling ECU*1 or headlight swivel ECU*2 stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the headlight leveling ECU*1 or headlight swivel ECU*2.
- *1: w/ Static Headlight Auto Leveling
- *2: w/ Dynamic Headlight Auto Leveling
- *1: w/ Static Headlight Auto Leveling
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
