2011-2013 Land Cruiser · Service Manual Vehicle Exterior

B2427 CAN Communication Malfunction

Diagnostic trouble codes · Vehicles built from Jan 2012

DESCRIPTION

The headlight swivel ECU sends and receives data to and from various ECUs via CAN communication.
DTC Code
DTC Detection Condition
Trouble Area
B2427
CAN communication malfunction between the headlight swivel ECU and other ECUs.
  1. CAN communication system
  2. Headlight swivel ECU assembly

INSPECTION PROCEDURE

NOTICE:
After replacing the headlight swivel ECU, initialization of the ECU is necessary (except w/ Dynamic Headlight Auto Leveling) (Click here).


1. CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC B2427 output does not occur.



NG
Go to step 2
OK

USE SIMULATION METHOD TO CHECK (Click here)

2. CHECK CAN COMMUNICATION SYSTEM
  1. for LHD:

    1. Perform a CAN communication system inspection (Click here).

  1. for RHD:

    1. Perform a CAN communication system inspection (Click here).

      OK:
      The CAN communication system is normal.

      Result 
      Result
      Proceed to
      OK (for LHD)
      A
      OK (for RHD)
      B
      NG (for LHD)
      C
      NG (for RHD)
      D



B
REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

REPLACE HEADLIGHT SWIVEL ECU ASSEMBLY (Click here)


← B2424 Headlight Leveling Motor LH Communication Malfunction (+ B2425) (from Jan 2012)B2450 Initialization has not been Performed (from Jan 2012) →