2011-2013 Land Cruiser · Service Manual Vehicle Interior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


REMOVE VISCOUS HEATER RELAY

E154380
  1. Remove the viscous heater relay from the engine room relay block.


INSPECT VISCOUS HEATER RELAY

B060778E97
  1. Measure the resistance of the viscous heater relay.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage not applied between terminals 1 and 2
    10 kΩ or higher
    Battery voltage applied to terminal 1 and 2
    Below 1 Ω

    1. If the result is not as specified, replace the relay.


INSTALL VISCOUS HEATER RELAY

E154380
  1. Install the viscous heater relay to the engine room relay block.

← INSTALLATION (from Jan 2012)ON-VEHICLE INSPECTION (from Sep 2011) →