2011-2013 Land Cruiser · Service Manual Vehicle Interior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


REMOVE MAGNET CLUTCH RELAY

E160501
  1. Remove the magnet clutch relay from the engine room relay block.


INSPECT MAGNET CLUTCH RELAY

B060778E97
  1. Measure the resistance of the magnet clutch relay.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Battery voltage not applied between terminals 1 and 2
    10 kΩ or higher
    Battery voltage applied to terminal 1 and 2
    Below 1 Ω

    1. If the result is not as specified, replace the relay.


INSTALL MAGNET CLUTCH RELAY

E160501
  1. Install the magnet clutch relay to the engine room relay block.

← ON-VEHICLE INSPECTION (from Sep 2011)ON-VEHICLE INSPECTION (from Sep 2011) →