ON-VEHICLE INSPECTION
Inspection · Vehicles built from Sep 2011
| REMOVE REAR COOLER RELAY |
![]() ![]() |
Remove the rear cooler relay from the engine room relay block.
| INSPECT REAR COOLER RELAY |
![]() ![]() |
Measure the resistance of the relay.
- Standard Resistance:
Tester Connection
Specified Condition
3 - 4
Below 1 Ω
3 - 5
10 kΩ or higher
3 - 4
10 kΩ or higher
(Battery voltage is applied to terminals 1 and 2)
3 - 5
Below 1 Ω
(Battery voltage is applied to terminals 1 and 2)
| INSTALL REAR COOLER RELAY |
![]() ![]() |
Install the rear cooler relay to the engine room relay block.



