REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FRONT BUMPER COVER |
for Standard:
Remove the front bumper cover (Click here).
w/ Winch:
Remove the front bumper cover (Click here).
| 3. REMOVE SHROUD BLOWER ASSEMBLY |
![]() ![]() |
Disconnect the connector.
Remove the bolt and shroud blower as shown in the illustration.


