C1781 Suspension Control ECU Malfunction
Diagnostic trouble codes · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
DTC Code
|
Detection Condition
|
Trouble Area
|
C1781
|
A suspension control ECU malfunction is detected.
|
Suspension control ECU
|
INSPECTION PROCEDURE
- NOTICE:
- If DTC C1782 is stored at the same time, perform the inspection for DTC C1782 first.
- If the suspension control ECU or height control sensor is replaced, the vehicle height offset calibration must be performed (Click here).
| 1. CLEAR DTC |
 |
Clear the DTCs (Click here).
| NEXT |
|
 |
|
| 2. CHECK FOR DTC |
 |
Check for DTCs (Click here).
- OK:
- C1781 is not output.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|