This circuit consists of the air conditioning control assembly and air conditioning amplifier assembly. When the air conditioning control assembly is operated, signals are transmitted to the air conditioning amplifier assembly through the LIN communication system. If the LIN communication system malfunctions, the air conditioning amplifier assembly does not operate when the air conditioning control assembly is operated.
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Inspect the fuses and relays for circuits related to this system before performing the following inspection procedure.
1. CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - AIR CONDITIONING CONTROL)
Disconnect the E81 air conditioning amplifier assembly connector.
Disconnect the F10 air conditioning control assembly connector.
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
E81-37 (LIN1) - F10-5 (LIN1)
Always
Below 1 Ω
F10-5 (LIN1) - Body ground
Always
10 kΩ or higher
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
2. CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL - BATTERY AND BODY GROUND)
Disconnect the F10 air conditioning control assembly connector.
Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection
Switch Condition
Specified Condition
F10-7 (IG+) - F10-1 (GND)
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
F10-1 (GND) - Body ground
Always
Below 1 Ω
Text in Illustration
*a
Front view of wire harness connector (to Air Conditioning Control Assembly)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
3. REPLACE AIR CONDITIONING CONTROL ASSEMBLY
Temporarily replace the air conditioning control assembly with a new or normally functioning one (Click here).
NEXT
4. CHECK AIR CONDITIONING CONTROL ASSEMBLY
Operate the air conditioning control assembly to check that it functions properly.
OK:
Air conditioning control assembly operates normally.
NG
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)