2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Sep 2011


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / DTC.

  5. Check the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / DTC.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Sep 2011)DATA LIST / ACTIVE TEST (from Sep 2011) →