U0100 Lost Communication with ECM / PCM "A"
Diagnostic trouble codes · Vehicles built from Jan 2012
Also covers:
- U0126 Lost Communication with Steering Angle Sensor Module
- U0129 Lost Communication with Brake System Control Module
- U0130 Lost Communication with Steering Effort Control Module
DESCRIPTION
The power steering ECU receives signals from the ECM, steering angle sensor, skid control ECU and steering control ECU via the CAN communication system.| DTC Code |
DTC Detection Condition |
Trouble Area |
| U0100 |
The engine speed signal is lost. |
|
| U0126 |
The steering angle signal is lost. |
|
| U0129 |
The vehicle speed signal is lost. |
|
| U0130 |
The VGRS relative angle signal is lost. |
|
INSPECTION PROCEDURE
| 1. CHECK FOR DTC (CAN COMMUNICATION SYSTEM) |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
DTC is not output.
A
DTC is output.
for LHD
B
for RHD
C
|
|
||||
|
|
||||
| A | ||
| ||
