DIAGNOSTIC TROUBLE CODE CHART
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
| DTC Code |
Detection Item |
Trouble Area |
See page |
| B2311 |
Power Window Motor Malfunction |
- Power window regulator motor - Battery disconnection when ignition switch ON - Incorrect installation of power window components - Overheated power window regulator motor |
Click here
|
| B2312 |
Power Window Switch Malfunction |
- Multiplex network master switct - Power window regulator switch - Harness or connector - Multiplex network master switch held in same position for more than 20 sec. - Power window regulator swith held in same position for more than 20 sec. |
Click here
|
| B2313 |
Glass Position Initialization Incomplete |
- Power window regulator motor - Power window regulator motor is not initialized |
Click here
|