2011-2013 Land Cruiser · Service Manual Vehicle Exterior

DIAGNOSTIC TROUBLE CODE CHART

Diagnostic trouble codes · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.

Power Window Control System 
DTC Code
Detection Item
Trouble Area
See page
B2311
Power Window Motor Malfunction
- Power window regulator motor
- Battery disconnection when ignition switch ON
- Incorrect installation of power window components
- Overheated power window regulator motor
Click here
B2312
Power Window Switch Malfunction
- Multiplex network master switch
- Power window regulator switch
- Harness or connector
- Multiplex network master switch held in same position for more than 20 sec.
- Power window regulator switch held in same position for more than 20 sec.
Click here
B2313
Glass Position Initialization Incomplete
- Power window regulator motor
- Power window regulator motor is not initialized
Click here
← DIAGNOSTIC TROUBLE CODE CHART (Sep 2011 – Dec 2011)B2311 Power Window Motor Malfunction (Sep 2011 – Dec 2011) →