2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR EVAPORATOR TEMPERATURE SENSOR

E160597E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    8 - 7
    -10°C (14°F)
    7.30 to 9.10 kΩ
    8 - 7
    -5°C (23°F)
    5.65 to 6.95 kΩ
    8 - 7
    0°C (32°F)
    4.40 to 5.35 kΩ
    8 - 7
    5°C (41°F)
    3.40 to 4.15 kΩ
    8 - 7
    10°C (50°F)
    2.70 to 3.25 kΩ
    8 - 7
    15°C (59°F)
    2.14 to 2.58 kΩ
    8 - 7
    20°C (68°F)
    1.71 to 2.05 kΩ
    8 - 7
    25°C (77°F)
    1.38 to 1.64 kΩ
    8 - 7
    30°C (86°F)
    1.11 to 1.32 kΩ

    If the result is not as specified, replace the rear evaporator temperature sensor.

    NOTICE:
    1. Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.
    2. When measuring the sensor temperature must be the same as the ambient temperature.

    HINT:
    As the temperature increases, the resistance decreases (see the graph).

← DISASSEMBLY (from Sep 2011)REASSEMBLY (from Sep 2011) →