REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE TIMING BELT |
Remove the timing belt (Click here).
| 3. REMOVE CRANKSHAFT TIMING PULLEY |
Using SST, remove the timing pulley.

- SST
- 09950-50013
(09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05011)
- HINT:
- Apply a lubricant to the threads and end of SST.
- Parts Number:
Item
Parts number
SST (Bolt A)
09953-05020
SST (Bolt B)
09953-05010
| 4. REMOVE OIL PUMP SEAL |
Using a knife, cut off the lip of the oil seal.

Using a screwdriver, pry out the oil seal.
- NOTICE:
- Do not damage the surface of the oil seal press fit hole and crankshaft.
- HINT:
- Tape the screwdriver tip before use.
