REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. DISCHARGE FUEL SYSTEM PRESSURE |
Discharge the fuel system pressure (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE V-BANK COVER SUB-ASSEMBLY |
Remove the 2 nuts and V-bank cover.

| 4. REMOVE VACUUM CONTROL VALVE SET (w/ Secondary Air Injection System) |
Disconnect the 2 VSV connectors.

Disconnect the 3 vacuum hoses.
Remove the 2 bolts and vacuum control valve set.
| 5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY |
Disconnect the vacuum transmitting hose from the pressure regulator.

Disconnect the fuel return hose from the pressure regulator.

Remove the 2 bolts, and pull out the pressure regulator.
Remove the O-ring from the pressure regulator.
