B2074 Driver Side Seat Belt Buckle Switch Circuit Malfunction
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
This DTC is stored when there is a malfunction in the front seat inner belt buckle switch circuit for the driver side. The seat belt control ECU receives buckle switch condition information from the center airbag sensor via the CAN communication line and controls the pre-crash safety system.When DTC B2074 is stored, DTC B1655 is also output.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B2074 |
Malfunction in the front seat inner belt (buckle switch) circuit. |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- If DTC B1655 is not cleared, DTC B2074 continues to be output.
| 1. CHECK DTC (CAN COMMUNICATION SYSTEM) |
Use the intelligent tester to check if the CAN communication system is functioning normally (Click here for LHD, Click here for RHD).
Result Result
Proceed to
OK
(DTC U0151 is not output)
A
NG
(for LHD)
B
NG
(for RHD)
C
- HINT:
- DTC U0151: Lost Communication with Airbag ECU
|
|
||||
|
|
||||
| A | |
| 2. CHECK DTC (AIRBAG SYSTEM) |
Using the intelligent tester, enter the following menus: Body / SRS Airbag / Trouble Code.
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC B1655 is not output.
- HINT:
- DTC B1655: Driver Side Seat Belt Buckle Switch Circuit Malfunction
|
|
||||
| OK | |
| 3. CHECK DTC (PRE-CRASH SAFETY SYSTEM) |
Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
OK
(DTC B2074 is not output)
A
NG
(for LHD)
B
NG
(for RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
