C1AE8 Rear Right Center Sensor Malfunction
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The No. 3 ultrasonic sensor RH is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 3 ultrasonic sensor RH. If the No. 3 ultrasonic sensor RH has an open circuit or other malfunction, it will not function normally.| DTC Code |
DTC Detection Condition |
Trouble Area |
| C1AE8 |
A malfunction of the No. 3 ultrasonic sensor RH. |
|
- HINT:
- *1: w/ Parking Assist Monitor System
- *2: w/o Parking Assist Monitor System
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the engine switch on (IG) and move the shift lever to R. Then clear the DTC.
| 1. CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
DTC C1AE8 is output
A
No DTC is output
B
|
|
||||
| A | |
| 2. REPLACE NO. 3 ULTRASONIC SENSOR RH |
Replace the No. 3 ultrasonic sensor RH with a normally functioning sensor (Click here).
| NEXT | |
| 3. CHECK DTC OUTPUT |
Clear the DTCs (Click here).
Check for DTCs (Click here).
Result Result
Proceed to
DTC C1AE8 is output (w/ Parking Assist Monitor System)
A
DTC C1AE8 is output (w/o Parking Assist Monitor System)
B
No DTC is output
C
|
|
||||
|
|
||||
| A | ||
| ||
