2011-2013 Land Cruiser · Service Manual Vehicle Interior

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Sep 2011


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Trouble Codes.

  5. Clear the DTCs.

← TERMINALS OF ECU (from Jan 2012)CHECK MODE PROCEDURE (from Sep 2011) →