REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
| 2.
REMOVE FRONT SEAT ASSEMBLY (for Manual Seat) |
 |
Remove the front seat assembly (Click here).
| 3.
REMOVE FRONT SEAT ASSEMBLY (for Power Seat) |
 |
Remove the front seat assembly (Click here).
| 4.
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat) |
 |
Disconnect the connectors and detach the clamps.
- Remove the nut and front seat inner belt assembly.
| 5.
REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) |
 |
Disconnect the connectors and detach the clamps.
- Remove the nut and front seat inner belt assembly.