2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

E155225E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (ECC) - 3 (CCS)
    Neutral
    10 kΩ or higher
    1 (ECC) - 3 (CCS)
    +RES
    216 to 264 Ω
    1 (ECC) - 3 (CCS)
    -SET
    567 to 693 Ω
    1 (ECC) - 3 (CCS)
    CANCEL
    1386 to 1694 Ω
    1 (ECC) - 3 (CCS)
    Main Switch OFF
    10 kΩ or higher
    1 (ECC) - 3 (CCS)
    Main Switch ON
    Below 1 Ω

    1. If the result is not as specified, replace the cruise control main switch assembly.

← REMOVAL (from Jan 2012)INSPECTION (from Jan 2012) →