Power Mirror Surface Position is not Memorized
Circuit diagnosis · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
SYSTEM DESCRIPTION
The outer rear view mirror assembly has a mirror position sensor. The position control ECU and switch sends instructions to the outer mirror control ECU. Then the outer mirror control ECU receives mirror information from the mirror position sensors, and memorizes the mirror positions.INSPECTION PROCEDURE
| 1. CHECK DTC |
Use the intelligent tester to check if the CAN communication system is functioning normally.
Result Result
Proceed to
CAN DTC is not output
A
CAN DTC is output (for LHD)
B
CAN DTC is output (for RHD)
C
|
|
||||
|
|
||||
| A | |
| 2. CHECK SEAT MEMORY SWITCH FUNCTION (SEAT POSITION MEMORY FUNCTION) |
Check that the driver side seat can be moved using the seat memory switch.
- OK:
- Driver side seat can be moved using seat memory switch.
|
|
||||
| OK | |
| 3. CHECK SEAT MEMORY SWITCH FUNCTION (REGISTRATION OF SEAT MEMORY SWITCH) |
Check that the memory operation is properly completed.
- NOTICE:
- The seat position will not be recorded if the seat memory SET switch and 2 or more of the seat memory switches (for example, seat memory switch 1 and seat memory switch 2) are pressed simultaneously.
- If the operation fails, the mirror facing direction will not be memorized until the seat memory SET switch is turned off.
- The mirror facing direction will not be memorized when the mirror is operated manually.
- The seat position will not be recorded if the seat memory SET switch and 2 or more of the seat memory switches (for example, seat memory switch 1 and seat memory switch 2) are pressed simultaneously.
- OK:
- Driver side seat position can be memorized using seat memory switch (for Driver Side).
|
|
||||
| OK | ||
| ||
| 4. READ VALUE USING INTELLIGENT TESTER (MIRROR POSITION MEMORY) |
Check the Data List for proper functioning of the mirror position memory (Click here).
Mirror Tester Display
Measurement Item/Display
Normal Condition
Diagnostic Note
Mirror Memory No.1
Mirror position memorized in seat memory switch memory1 / ON or OFF
ON: Memorized
OFF: Not memorized
-
Mirror Memory No.2
Mirror position memorized in seat memory switch memory2 / ON or OFF
ON: Memorized
OFF: Not memorized
-
Mirror Memory No.3
Mirror position memorized in seat memory switch memory3 / ON or OFF
ON: Memorized
OFF: Not memorized
-
- OK:
- On tester screen, each item changes between ON and OFF according to above chart.
|
|
||||
| OK | ||
| ||
