The combination meter communicates with the skid control ECU via the CAN line.
DTC Code
DTC Detection Condition
Trouble Area
U0129
When 15 seconds have elapsed after the engine is started and IG voltage is 10.5 V or more while no communication with the skid control ECU continues for 3 seconds or more (no communication with the ECM or skid control ECU continues for 60 seconds or more).
CAN communication system
WIRING DIAGRAM
INSPECTION PROCEDURE
1. CHECK FOR DTC
Check for DTCs and note any codes that are output (Click here).
If CAN communication system DTC U0129 and another DTC are output at the same time, perform troubleshooting for CAN communication system DTC U0129 first.