INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
INSTALL INDOOR ELECTRICAL KEY OSCILLATOR |
 |
- Attach the 2 claws to install the electrical key oscillator.
Connect the connector.
Install the front floor carpet assembly.
| 2.
INSTALL REAR NO. 2 SEAT PROTECTOR
|
 |
Attach the 10 claws to install the 2 seat protectors.
| 3.
INSTALL REAR NO. 1 SEAT PROTECTOR
|
 |
Attach the 10 claws to install the 2 seat protectors.
| 4.
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH |
 |
Install the front quarter trim panel assembly RH (Click here).
| 5.
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH |
 |
Install the front quarter trim panel assembly LH (Click here).
| 6.
INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
 |
Install the rear No. 1 seat assembly RH (Click here).
| 7.
INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
 |
Install the rear No. 1 seat assembly LH (Click here).
| 8.
INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type) |
 |
Install the rear No. 2seat assembly RH (Click here).
| 9.
INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Face to Face Seat Type) |
 |
Install the rear No. 2seat assembly LH (Click here).
| 10.
INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type) |
 |
Install the rear No. 2 seat assembly RH (Click here).
| 11.
INSTALL REAR NO. 2 SEAT ASSEMBLY LH (except Face to Face Seat Type) |
 |
Install the rear No. 2 seat assembly LH (Click here).
| 12.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 13.
CHECK SRS WARNING LIGHT |
 |
Check the SRS warning light (Click here).