B1443/43 Air Outlet Damper Control Servo Motor Circuit
Diagnostic trouble codes · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
DESCRIPTION
The air outlet damper servo motor (for driver side mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper (for driver side mode) to any position, which controls the air outlet changes.- HINT:
- Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.
| DTC Code |
DTC Detection Condition |
Trouble Area |
| B1443/43 |
The air outlet damper position does not change even if the air conditioning amplifier assembly operates the air outlet damper servo motor. |
|
WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR) |
Use the Data List to check if the servo motor is functioning properly.
Air Conditioner Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
A/O Damper FACE Pos(D)
Air outlet damper servo motor (for driver side mode) target pulse /
Min.: 6, Max.: 117
FACE1: 117 (pulse)
FACE2: 109 (pulse)
B/L1: 93 (pulse)
B/L2: 81 (pulse)
FOOT-F: 41 (pulse)
FOOT-R: 41 (pulse)
FOOT-D: 52 (pulse)
F/D: 18 (pulse)
DEF: 6 (pulse)
-
- OK:
- The display is as specified in the normal condition.
|
|
||||
| OK | ||
| ||
| 2. CHECK AIR OUTLET DAMPER SERVO MOTOR (OPERATION) |
for LHD
Replace the air outlet damper servo motor (for driver side mode) (Click here).
for RHD
Replace the air outlet damper servo motor (for driver side mode) (Click here).
- HINT:
- Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
| NEXT | |
| 3. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC B1443 is not output.
Result Result
Proceed to
OK (for LHD)
A
OK (for RHD)
B
NG (for LHD)
C
NG (for RHD)
D
|
|
||||
|
|
||||
|
|
||||
| A | ||
| ||
